Synthesis and magnetic heating characteristics of thermoresponsive poly (N-isopropylacrylamide-co-acrylic acid)/nano Fe3O4 nanparticles

Tóm tắt

In this work the synthesis of thermo-sensitive polymer coated magnetic nanoparticles and their inductive heating have been studied. Poly (N-isopropylacrylamide-co-acrylic acid) (NA) polymers were first synthesized by emulsion polymerization of poly(N-isopropylacrylamide) (NIP) in water and followed by encapsulating magnetic nanoparticles (MNPs). As increasing the concentration of acrylic acid (AA), the lower critical solution temperature (LCST) increased, so that with 150% of AA (molar ratio) the LCST reached 42 °C, which is close to the temperature of hyperthermia treatment. Magnetization and ac susceptibility measurements were conducted to depict some characteristics of the NIP-MNPs and NA-MNPs that are related with the loss power. Attempts to analyze the rate of magnetic inductive heating were performed to show the Brownian relaxation origin of additional heat source created by the magnetite nanoparticles capped with thermosensitive polymers. Our results suggest that these thermo-sensitive polymercoated magnetic nanoparticles show a potential for hyperthermia and drug delivery application.

Từ khoá

magnetic nanoparticles, thermo-responsive polymer, magnetic inductive heating, hyperthermia, drug delivery system

Tài liệu tham khảo

[1] Lai B H, Chang C H, Yeh C C and Chen D H 2013 Sep. Purif. Technol. 108 83
[2] Zhang L, Zhu X, Jiao D, Sun Y and Sun H 2013 Mater. Sci. Eng. C 33 1989
[3] Lübbe A S et al 1996 Cancer Res. 56 4686
[4] Alexiou C et al 2006 Eur. Biophys. J. 35 446
[5] Ingrid H and Werner A 2012 Nanomedicine 7 1443
[6] Babincová M, Altanerova V, Altaner C, Bergemann C and Babinec P 2008 IEEE T. NanoBiosci. 7 15
[7] Johannsen M, Gneveckow U, Taymoorian K, Thiesen B, Waldöfner N, Scholz R, Jung K, Jordan A, Wust P and Loening S A 2007 Int. J. Hyperther. 23 315
[8] Zhang J and Misra R D K 2007 Acta Biomater. 3 838
[9] Heras C D L, Pennadam S and Alexander C 2005 Chem. Soc. Rev. 34 276
[10] Zhang J, Srivastava R and Misra R 2007 Langmuir 23 6342
[11] Bromberg L E and Ron E S 1998 Adv. Drug Deliver. Rev. 31 197
[12] Purushotham S and Ramanujan R V 2010 Acta Biomater. 6 502
[13] Lee C F, Lin C C, Chien C A and Chiu W Y 2008 Eur. Polym. J. 44 2768
[14] Pankhurst Q A, Connolly J, Jones S K and Dobson J 2003 J. Phys. D: Appl. Phys. 36 167
[15] Rosensweig R E 2002 J. Mag. Mag. Mater. 252 370
[16] Mai T T T, Ha P T, Pham H N, Le T T H, Pham H L, han T B H, Tran D L and Nguyen X P 2012 Adv. Nat. Sci.: Nanosci. Nanotechnol. 3 015006
[17] Faraji M, Yamini Y and Rezaee M 2010 J. Iran. Chem. Soc. 7 37
[18] Chen G and Hoffman A S 1995 Nature 373 49
[19] Hoffman A S et al 2000 J. Biomed. Mater. Res. 52 577
[20] Barros A P H 2009 Synthesis of multifunctional magnetic nanoparticles for biomedical applications PhD Dissertation University of Puerto Rico p105
[21] Giri J, Pradhan P, Sriharsha T and Bahadur D 2005 J. Appl. Phys. 97 913
[22] Devkota J, Mai T T T, Stojak K, Ha P T, Pham H N, Nguyen X P, Mukherjee P, Srikanth H and Phan M H 2014 Sensors Actuators B 190 715
[23] Khandhar A P, Ferguson R M and Krishnan K M 2011 J. Appl. Phys. 109 07B310