Simple crack propagation model of pressure-sensitive adhesives

Tóm tắt

We propose a simple mechanical model describing viscoelasticity, cavitation growth and crack propagation during the debonding process in pressure-sensitive adhesives (PSAs). Typical materials of PSA are made of block copolymers and they are usually very soft and highly dissipative, and can stick on a variety of surfaces under low pressure in short time. The debonding process of PSA is governed by very complicated dynamics, for example, deformation of the adhesive layer, cavity expansion and coalescence. Our model is a modified version of that proposed by Yamaguchi et al (2006 Eur. Phys. J. E 20 7). We extended his simple model to be applicable to the final rupture process and applied the model to some cases, where we studied the effects of the change of PSA layer's thickness, separation speed and friction coefficient. Our results are qualitatively in good agreement with the experimental data.

Từ khoá

PSA, crack propagation, cavity expansion

Tài liệu tham khảo

[1] Yamaguchi T, Morita H and Doi M 2006 Eur. Phys. J. E 20 7
[2] Gay C and Leibler L 1999 Phys. Today 52 48
[3] Brennen C E 1995 Cavitation and Bubble Dynamics (New York: Oxford University Press)
[4] Nakamura K 1997 Non-Newtonian Fluid Mechanics (Tokyo: Corona) (in Japanese)
[5] Bird R B, Curtiss C F, Armstrong R C and Hassager O 1977 Dynamics of Polymeric Liquids 2nd edn, vol 1 (New York: Wiley)
[6] Safran S A 2003 Statistical Thermodynamics of Surfaces, Interfaces and Membranes (Cambridge: Westview)
[7] Shull K R and Creton C 2004 J. Polym. Sci. B 42 4023

Các bài trích dẫn đến

1. Kai Jin, Diego Lopez Barreiro, Francisco J Martin-Martinez, Zhao Qin, Marc Hamm, Charles W Paul, Markus J Buehler. Improving the performance of pressure sensitive adhesives by tuning the crosslinking density and locations in Polymer (Vol. 154, 2018)
2. Mahzan Johar, King Jye Wong, Mohd Nasir Tamin. Characteristics of Adhesive Joints under Rate-Dependent Tensile Loading in Applied Mechanics and Materials (Vol. 660, 2014)
3. M Johar, SFM Asasaari, MN Tamin. Strain rate-dependent deformation and failure process of adhesive joints in 36th International Electronics Manufacturing Technology Conference (2014)
4. 김유섭, 조희재, 정용찬, 이수열. 폴리이소프렌 감압 접착제의 박리특성 평가 in 폴리머 (Vol. 43, No. 1, 2019)